The N95 fish type mask covers your nose and mouth, but if you don’t put it on correctly, you won’t be protected from pollutants, viruses, and bacteria. However, it only takes 5 easy steps to put on your N95 fish-type mask correctly!
If you follow these instructions, you will have peace of mind knowing that you can breathe safely even if the air quality deteriorates during your day outside. Check out this step-by-step guide on how to put on an N95 fish-type mask the right way!
Wash Your Hands with Soap and Warm Water
According to the CDC, begin by washing your hands with soap and warm water. This will keep any dirt or bacteria from coming into contact with your face, as it can worsen allergies and affect how much protection you get from the mask.
Next, wipe down the surface of your face using a wet cloth to remove makeup or sweat that might be interfering with your seal. Pull hair back if necessary so it doesn’t get in the way. You want to avoid having anything touch your skin but air. If you have long hair, put it up in a bun or ponytail before putting on the mask.
Open the N95 Fish Type Mask Properly
The process of putting on a mask is simple. For starters, you’ll need a fish N95 mask, which can be found at your local hardware store or the N95 mask in stock. Take the mask out of its packet and hold it by one end so that you have access to the inside surface.
Next, pull off one layer at a time starting with either side flap so that they each come away from their respective hemispheres. If there’s any excess latex, peel this off and discard it. Now put the two hemispheres together, one half over the other, using care not to fold or crease them.
You want to make sure they’re airtight when they seal up against each other. As such, ensure that all surfaces are aligned before pushing down firmly on both sides simultaneously until you hear a satisfying click! Congratulations – now you know how to properly put on an N95 fish-type mask!
Apply the N95 Fish Type Mask Evenly Over Your Face
This step is probably the most important. If you don’t make sure to apply your mask evenly, some areas will get too much and others not enough. To help prevent this, use your fingers or the nose strips (if you have them) and make sure that you cover all areas of your nose, mouth, and chin. Gently stretch the sides of the mask for those hard-to-reach places.
Make sure to seal the bottom of the mask so that it covers as much skin as possible. Remember to tuck in any excess fabric around your neck so it doesn’t fall over your face. Congratulations! You now know how to properly put on fish masks N95!
First, find a fresh air source by looking for an open window or door. Next, remove the mask from its package and remove the protective film from one side of the mask. Now pull back your hair so it does not interfere with the fit of the mask, then place your hair behind your ears if necessary.
Smooth Out any Air Bubbles from the N95 Fish Type Mask
Smooth out any air bubbles by rubbing your fingers gently over the mask, smoothing out any wrinkles or creases in the latex so that you’re satisfied with how it feels against your skin. Once you’ve done this, take a deep breath and exhale sharply through your mouth (not nose). The expelled air will push out any remaining pockets of trapped air and should result in a completely flat surface for the final step.
Once your mask is on correctly, tighten the band around your head. If you find that you need more airflow inside of your mask, please ask for assistance and adjust accordingly. Keep in mind that while wearing this type of mask, you must be careful not to touch or rub any part of the mask against anything including hair.
The material in the fabric can trap microscopic particles which may result in infection if rubbed into open wounds or other sensitive areas. It’s also important to note that your face must be clean when wearing this type of mask; otherwise, it will not be effective because it cannot seal properly against skin covered with sweat or dirt.
Breathe Normally through the N95 Fish Type Mask
If you are wearing an oxygen mask that blocks off your nose and mouth, follow the instructions for the oxygen mask instead. To avoid suffocation, hold your breath for no more than 3 minutes. This rule applies to situations where you may not be able to breathe through either your nose or mouth.
The two most common examples of this are when you’re in a gas leak environment or underwater. In these cases, if there is enough air in the room to sustain life then it’s recommended that you put on a face mask as well so that it will filter out any gases.